Lighting made simple

Vinaco light bulbs, sorted by the socket they fit

Find the bulb your fixture takes by its base, its voltage and its wattage. 24 halogen and LED bulbs, each with its size and pack price.

Find your bulb Shop all Vinaco

Vinaco GU10 Halogen Bulb, 120V Dimmable, 50W, 6-pack

Vinaco GU10 Halogen Bulb, 120V Dimmable

  • GU10
  • 25–50W
  • 2800K
  • Dimmable

$13.9150W, 6-pack · $2.32 per bulb

Restock on Amazon
  • Sorted by baseGU10, GU5.3, E26 and more
  • 12V or 120VLow-voltage and line-voltage bulbs
  • Price per bulbOften lower in bigger packs
  • Halogen and LEDThree bulbs come in both
  • PricesUpdated on a schedule
  • CheckoutWith our retail partner

Halogen bulbs and their Vinaco LED stand-ins

Three of our halogen bulbs have an LED with the same base and shape. The LED draws far less power and lasts longer.

Vinaco halogen bulbs and their LED stand-ins
HalogenWatts and lumensLEDWatts and lumensLED rated lifeLED dims
Vinaco GU10 Halogen50W, 500 lmVinaco GU10 LED5W, 450 lm30,000 hNo
Vinaco MR16 Halogen50W, 800 lmVinaco MR16 LED7W, 450 lm30,000 hNo
Vinaco PAR38 Halogen80W, 1,500 lmVinaco PAR38 LED15W, 1,300 lm30,000 hYes

The LED versions of GU10 and MR16 do not dim, and none of them will run a candle warmer.

What buyers say about Vinaco bulbs

  • 4.0 out of 5

    They don't last long but they work

    This was my second pack of these bulbs for track lighting. I only had two from the first batch last beyond 8 months with modest use. I'm hoping for better with this batch but at the price they are not too bad and nice form factor. You have to use the suction cup to replace them because they way they go in is a challenge if you don't use the suction cup. Also make sure they are completely cooled down before trying to replace as they get hot and can take a while to cool down even after they blow.

  • 5.0 out of 5

    "Reliable G4 Halogen Bulbs for Various Uses"

    I purchased these G4 halogen bulbs for my project, and they've been great so far. The 10-pack is a good value, and the bulbs are bright and provide consistent light. The 12V, 10W rating is perfect for my needs, and installation was straightforward. I've used a few already with no issues, and I'm happy with the overall performance. The only reason I didn't give a full 5 stars is that they do run a bit hotter than expected, but that's typical with halogen bulbs. Still, I would definitely recommend them!

  • 5.0 out of 5

    Beautiful glow

    This light gives a warm light to any setting with the same brightness as an incandescent bulb from the last century. It takes the worry out of excessive power use and lets one go happily into the evening hours with sheer joy!

About Vinaco

  • 24bulbs in the Vinaco catalog
  • 8base types, from G4 to E26
  • 13 + 11halogen and LED lines
Vinaco GU10+C Halogen Bulb with Glass Cover, 120V

More than twenty years of small bulbs

Vinaco has been in the lighting trade for more than twenty years. The line began with small halogen bulbs, the kind people hunt for when a candle warmer or a range hood goes dark. Those bulbs are easy to get wrong. A GU10 and an MR16 look the same from the front and will not fit each other's sockets. So from the start our packs carried the base and the voltage in plain letters.

Vinaco JD E11 Halogen Bulb, 120V Mini-Candelabra

A catalog built around the socket

A lamp or a fixture is made for one base, one voltage and a top wattage. That is why the Vinaco range is sorted by base first: twist-lock GU10, two-pin GU5.3, the looped G9, the straight-pin G8 and G4, and the screw bases E26, E12 and E11. Inside each group you choose the wattage, the color of white and the pack. Check the size in inches as well, since a bulb that fits the socket can still be too long for the shade.

Vinaco G8 Halogen Bulb, 120V Dimmable

Halogen where it still earns its place

Halogen has not gone away, and for good reasons. It dims on any old dimmer, shows colors as they are and makes heat, which a wax warmer needs. Our halogen bulbs cover those jobs. Next to them sits a growing LED line for fixtures that burn for hours: filament bulbs in clear and amber glass, milk-glass globes for vanity bars, and LED versions of the GU10, MR16 and PAR38.

Vinaco PAR16 Halogen Flood Bulb, 120V E26

What a bulb's name tells you

A bulb's name is a code. In GU10, the 10 is the gap between the two pins in millimeters. In MR16 and PAR38, the number is the width in eighths of an inch, so an MR16 is 2 in across and a PAR38 is 4.75 in. E26 is a screw base 26 mm wide. Light is counted in lumens and the color of white in kelvin, where 2700K is warm and 5000K is daylight.

Vinaco CA11 LED Flame-Tip Bulb, 4W Dimmable E12

Where halogen and LED stop

Halogen and LED fail at different jobs. Our PAR38 halogen is rated for 2,000 hours, so a dusk-to-dawn fixture is better served by the PAR38 LED. The GU10 LED cannot melt a candle, since a wax warmer needs the heat of a halogen. A 100 watt flood is too much for many cans, so read the label inside the can before you buy. The LED versions of the GU10 and the MR16 do not dim, and the halogen ones do.

Vinaco Jumbo Paper Clips, 2 Inch, 100-Count

What else carries the Vinaco name

Light is the center of the brand, and a few everyday goods share the name. There are pull chains that bring a ceiling fan's switches within reach, two rattan lamps that plug into a wall outlet, tubs of paper clips in two sizes and wide steel straws for smoothies. They have their own aisle, apart from the bulbs, and their own sizes and counts. Buyers rate several of them higher than any bulb in our range.

More about Vinaco

Vinaco questions

Where do I buy Vinaco bulbs?

At checkout with our retail partner. The buy button on a product takes you there, and payment, delivery and returns are handled there too.

How do I find the right Vinaco bulb for my fixture?

Take out the old bulb and look at the base. Then read the voltage and the top wattage on the fixture's label. Our bulb finder shows each base as a drawing and leads to the bulbs that fit it.

What is the difference between GU10 and MR16?

MR16 is a shape, a reflector 2 in across. GU10 is a base with two short pins that twist and lock, for 120V. The 12V MR16 has a GU5.3 base with two thin straight pins. They do not swap.

Can an LED bulb replace a halogen in a candle warmer?

No. A candle warmer lamp melts wax with the heat of a halogen beam. An LED GU10 gives light with little heat, so the wax stays hard.